Equipment List – Drilling Engineers

Drill Units

2016 CME-55 truck mounted on 2016 Freightliner,9,000 lbs. Torque

2009 Geoprobe 7822DT – Track Rig, Direct Push, Auger & Split Hammer

2007 CME-75 truck mounted on 2007 Freightliner, 13,000 lbs. Torque

1998 CME-75 truck mounted 2008 Ford F-750, 13,000 lbs. Torque

1993 CME-75 truck mounted 2006 Ford F-750, 13,000 lbs. Torque

1988 CME-55 truck mounted on 2004 Ford F-750, 8,000 lbs. Torque

1984 CME-55 truck mounted on 2005 Ford F-750, 8,000 lbs. Torque

1976 Texoma (Caisson Rig) mounted on 1992 Ford F-700

 

Support Vehicle

2013 Ford F-450 4×4 Flat Bed with Lift Gate

2008 Ford F-450 4×4 Flat Bed with Lift Gate

2007 Ford F-350 4×4 Flat Bed

2006 Ford F-750 with Steel Flatbed Carrier

2002 Ford F-350 4×4 Flat Bed with Lift Gate

1997 Ford 4×4 Flat Bed – 1½-Ton

 

Drill Unit Equipment and Tools (All CME Equipment)

2015 Drilling Barge

CME-75 Mast – 26′ quick mast disconnect

CME-55 Mast – 22′ quick mast disconnect

Hoists   – CME-75 – 8500 lb., 3200 lb. Hydraulic and 1800 lb. Hydraulic Wireline

– CME-55 – 7000 lb., 3200 lb. Hydraulic and 1800 lb. Hydraulic Wireline

Moyno water pump assembly

Hydraulic slide base – in and out and sideways

Hydraulic Leveling Jacks – 2 rear, 1 front

Automatic 140 lb. SPT hammer

Hollow Stem Augers – 3¼”, 4¼”, 6¼”, 8¼” and 10¼”

Continuous – Flight Augers – 3″ FA – 4″ FA – 6″ FA

Drill Stem –  A – AW – AWJ- NW-NX – 2 3/8 “ I.F.

Rotary –             Downhole Hammer

NQ2 Wireline Core Drilling

Tri-Cone & Ken Claw Rock Bits – 2″ to 8″ diameter

Angle Drill Capacity

Steam Cleaners

Generators

Trash Pumps

Sand Pump

Hydraulic Drum Handler- Grab/Lift/Tilt

 

Sampling Equipment

Cyrogenic Coring Barrels

Geoprobe Dual Tube (DT 22) Sampler – 2.25″

Geoprobe Macro Core Sampler – 2.25″

Geoprobe Dual Tube (DT 325) Sampler – 3.25″

CME Continuous Sampling System

Hydro-Punch Sampling System

Heavy-Duty Lnyac Split-Spoon Sampling

Shelby tubes

California Barrels – Standard and Modified

Giddings Samplers, Slotted & Solid

Bailers

Air Lift Development Pumps

2” Diameter & 4” Diameter Submersible Pumps

Test Pump – 5″ Dia. Submersible – 70 g.p.m. to 220 g.p.m.

Flowmeter – 3″ Dia. – to 250 g.p.m.

Packers – 3″ Dia. to 6″ Dia.

Injection Pumps

 

Safety Equipment

Fire Extinguishers

First Aid Kits

Respirators

Decontamination equipment

Protective Clothing: FRC, Boots, gloves, goggles, hard hats, ear plugs, rubberized suits, Tyvek

Spill Kits